油烟机烟管在吊顶下怎样遮挡(抽油烟机烟管在吊顶下怎么遮挡)

油烟机烟管在吊顶下怎样遮挡(抽油烟机烟管在吊顶下怎么遮挡)

首页家电维修油烟机更新时间:2022-01-20 22:17:53

原创 本设研习社

01.厨房吊顶该如何施工?

1. 安装边角线

先经过详细的测量工作后使用“弹线法” 用墨水在墙面上弹出水平线,确定好水平位置,在每个线上范围做好相应的标记,方便后期将木方钉入孔隙。

01. How to construct the kitchen ceiling?

1. Install the corner line

After detailed measurement

Use the "snap line method" to snap a horizontal line on the wall with ink

Determine the horizontal position

Mark each line range accordingly

It is convenient to nail the wood square into the hole in the later stage

2. 厨房顶部悬吊丝杆膨胀支架,在空间顶部做好测量,尺度测量无误后打孔安装并标记,丝杆支架上的膨胀螺栓钉入孔眼进行安装,切记一定要使用膨胀螺栓,不要使用泡钉,就这样,在厨房的顶部装好了垂直的悬吊支架。

2. Hanging screw rod expansion support on the top of the kitchen

Make measurements at the top of the space

After the dimension measurement is correct, drill holes for installation and mark

The expansion bolt on the screw support is nailed into the eyelet for installation

Remember to use expansion bolts instead of foam nails

In this way, a vertical suspension bracket was installed on the top of the kitchen

3. 安装主龙骨和铝扣板

主龙骨将挂在这种垂直的支架上,再将副龙骨用金属垫片卡扣在在装好的主龙骨上,测量好尺寸没有问题

就可以安装铝扣板,在墙角边缘不规则的区域,根据位置裁剪出合适的大小再进行安装。

3. Install the main keel and aluminum gusset plate

The main keel will be hung on this vertical support

Then snap the auxiliary keel on the installed main keel with metal gasket

There is no problem measuring the dimensions

The aluminum gusset plate can be installed

In areas with irregular corner edges

Cut the appropriate size according to the position before installation

02.厨房吊顶先装吊顶 or 先装吊柜?

这是关于厨房吊顶安装,很多人争议分歧非常大的问题,到底是先装吊柜还是先安装吊顶?

首先分两种情况,如果是防水石膏板吊顶,必须得先吊顶,再做吊柜,如果是铝扣板或者蜂窝大板

必须是先安装吊柜,再吊顶。

02. Is the ceiling installed first in the kitchen or the hanging cabinet installed first?

This is about kitchen ceiling installation

Many people dispute very different issues

Is the hanging cabinet installed first or the ceiling installed first?

First, there are two cases

In case of waterproof gypsum board ceiling

The ceiling must be suspended first, and then the hanging cabinet must be made

If it is aluminum gusset plate or honeycomb plate

The hanging cabinet must be installed first, and then the ceiling

如果是采用铝扣板吊顶,先装吊顶再装吊柜,在吊顶和吊柜之间收口处会产生缝隙,吊柜把吊顶的收口线给遮挡住,存在的缝隙里容易积灰和滋生蟑螂。

If the aluminum gusset plate ceiling is adopted, install the ceiling first and then the hanging cabinet

There will be a gap at the closing between the ceiling and the hanging cabinet

The hanging cabinet covers the closing line of the ceiling

It is easy to accumulate ash and breed cockroaches in the existing gap

有的人可能会想分板到顶来安装,在吊柜顶板和吊顶的交接处,采用玻璃胶进行密封处理,这样的操作就缺乏了收边条的收口美观效果,并且在视觉上没有任何的层次感。

如果先装吊柜再装吊顶,再吊柜吊顶交接处进行收口收边处理,完美的丰富了层次感和整体性,而且也没有任何的缝隙。

Some people may want to install it from board to top

At the junction of ceiling and ceiling

Sealing treatment with glass glue

This operation lacks the beautiful effect of closing the edge strip

And there is no visual sense of hierarchy

If the hanging cabinet is installed first and then the ceiling is installed

Then the junction of the ceiling of the hanging cabinet shall be closed

It perfectly enriches the sense of hierarchy and integrity

And there is no gap

另外油烟机的排烟管和电源插座,以及燃气热水器的废气排气管道,和煤气管道都要在安装吊顶前提前预埋

就免得后期出现各种问题和不必要的麻烦。

In addition, the smoke exhaust pipe and power socket of the range hood

And exhaust gas exhaust pipe of gas water heater

And gas pipelines shall be embedded in advance before installing the ceiling

So as to avoid all kinds of problems and unnecessary troubles in the later stage

要么旅行,要么学习,身体和灵魂总要有一个在路上。

充电吧同学!

来本设,学习室内设计,实现从无到有,从有到精的蜕变!

本设教育系列课程目前包括

软件类:sketch up、CAD、3D MAX、sketch book

设计类:方案优化设计、施工图深化、软装设计、全屋定制、平面方案绘制规范

营销类:商务谈单

如果对室内设计感兴趣的话,可以关注一下我。

点赞 转发 在头条私信“14”即可获得学习资料哦。

码字不易,希望小伙伴们走过路过可以点个赞吖

,

大家还看了
也许喜欢
更多栏目

© 2021 3dmxku.com,All Rights Reserved.